**Update Everything you need except UMD Tools 8/8**
Download: 
"Almost all in 1"
Has 2-6, Need to dowload 1 on the list below
-----------------------------------------------------------------------------
Step 1, WinMenc
1: Open up WinMenc
2: Go to add files
3: Find the video you want to use
4: Go to load profile
5: Select PSP AVI profile
6: Go to the audio tab
7: Select no audio on the drop down menu
8: Go to the video tab, and make sure the FPS is 29.970
9: Go to the batch tab
10: Select your output folder
11: Hit encode
12: Now go back to the audio tab
13: Select MP3 from the drop down list
14: Go to the video tab
15: Select no video.
16: Now go to batch and encode this.
17: You should now have two files. The video and sound separate
Step 2, WAV converter & Virtual Dub Mod
1: Open up the WAV converter
2: Go to add, then change file types to all
3: Find the MP3 from your video
4: Select output format as WAV
5: Hit start
6: That’s the audio out of the way
7: Now open up virtual dub mod
8: Go to file , then open video file
9: Find the video part of your file
10: Now go to save as
11: Make sure its going to save as an AVI
12: And that’s that. You now have the source files ready
Step 3, Sony UMD Tools
1: Open up the UMD Stream composer.exe
2: Go to new
3: Name it what you want. Click next
4: Tick the PSP Movie format (for game) bit.
5: Change the max clip size to 2mb or less
6: Hit finish
7: Go to video source
8: Find your video file made earlier with Virtual Dub Mod
9: Go to audio source
10: Find the WAV you made earlier with the MP3 to WAV converter.
11: Now go to run at the top
12: Choose encode + multiplex
13: Hit start
14: Well done the .mps has been made
Step 4, .mps to .pmf Converter
1: Go to My Documents (well yours)
2: Go to the UMD Stream composer folder
3: The .mps file is in here somewhere (I forget where exactly!)
4: Now rename the .mps file to gameboot.
5: Put it in the same directory as the .mps to .pmf converter
6: Run the converter (Click Run Me)
7: And your gameboot.pmf should be created
Now flash it your PSP using X-flash. As long as you have custom firmware installed with recovery mode, there are no worries!
this guide is not mine it was created by muratcan on psp-updates
--------------------------------------------------------------------------------------------
4. Concept of how to make .pmf icons for eboots
Quote:
|
Originally Posted by darkstone MPS To Gameboot And Icon Converter SendSpace | The Best Free File Sharing Service:
This new version supports icons now and has batch conversion (thanks psp-sniper!).
This is likely to be the final release.
Your icons must be as follows,
Rez - 144x80
Frame Rate - 29.97 (NOT 29.976 or 30, ONLY 29.97)
The AVI itself must be uncompressed and must be to to the specifiaction of the above.
There is a full enclosed guide included with the converter tool. Read it just to make sure you know you're doing everything right. All tools mentioned in the guide are free of charge and do not put watermarks in your video.
There is a 500kb limit on ICON1.PMF so be careful not to make your icons too long and bitrates too high.
Thanks to everyone who has taken an interest in the converter. Your support is greatly appreciated!
The PMF's created by this version now output a compatible devhook and 1.50+ PMF's. Also works in IRSHELL.
WARNING: USAGE OF THIS SOFTWARE CAN ONLY BE USED IN CONJUNCTION WITH THE SONY UMD COMPOSER TOOLS AND THE FILES IT OUTPUTS. I WILL NOT SUPPLY ANY DETAILS ON WHERE TO GET THESE TOOLS OR HOW TO USE THEM. THIS CONVERTER DOES NOT CONTAIN ANY DATA FROM THE TOOLS ITSELF AND THE DATA USED IN THIS CONVERTER IS CREATED BY MYSELF AND THE PEOPLE WHO ARE MENTIONED IN THE README. USE AT YOUR OWN RISK! |