3.52 M33 and 3.40 OE-X install guide

[Damo]

3.52 M33 Install Guide (With Pics!)
Scroll down if you want the 3.40 OE-A Install Guide.

This guide involves changing the Flash files on the PSP, This can be risky and i don't take responsibility for any damage.

Files needed:

Choose the link for your firmware:

Pre-Compiled 3.52 M33 for Custom Firmwares (3.40 Oe, 3.03 OE, 2.70 Se, ETC)
[Only registered and activated users can see links. ]
mirror download "[Only registered and activated users can see links. ]"

Pre-Compiled 3.52 M33 for 1.5
[Only registered and activated users can see links. ]

Instructions:
(1) Download the correct pack for your psps firmware and make sure your battery is at 75% or above.




(2) Make a folder in My Documents called 3.52 M33

(3) Extract "3.52 M33 Pre Compiled Installer For Custom Firmware Uploaded by Damo.zip" to your 3.52 M33 folder.



(4) Plug in your "PSP"



(5) Open up the folder you made called 3.52 M33 and double click on the "3.52 M33 Pre-Compiled For Custom Firmware.exe" (If you aren't using windows, right click on it and open with a rar program.)



(6) Click browse, select your psp drive letter in "My Computer" and click ok. Then click install, if it gives you any messages about overiting click yes to all.



(7) After the files have copied, Unplug your psp and go to the memory stick section in your game menu.

(8) Run "3.52 M33UPDATE" (If you are on 1.5, run KXploit Patcher, then run the "3.52 M33UPDATE")

(9) When it has loaded it will take you to a screen that has information about upgrading. Press X to start.

(10) Once the upgrade is complete, manually reboot your psp.

(11) If you want your psp to look good, install the AppleCor XMB Theme:
[Only registered and activated users can see links. ]



To install it, Unzip the AppleCor XMB files into a folder. Then boot your psp into recovery mode. First hold up the power button for five or more seconds to properly turn it off, Then hold the Right shoulder button and turn it on.

In the Recovery menu. Go to Advanced and select "Toggle USB (Flash 0)"

Then Plug a USB Cable in and your computer should come up with a removable disc. Copy the contents of your Flash 0 to a folder on your desktop or somewhere else to make a backup.

Copy the AppleCor Folder over and click yes to all on any overwriting.
Reboot your psp and your theme should be on.

(12) Now your PSP is on 3.52 M33, Good luck with Homebrewing!

3.52 M33-4 Update
Pre-Compiled 3.52 M33-4 Update (Only use after installing main firmware.)
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]




3.40 0E-X Install Guide
This Guide is Out dated, i reccomend you use the 3.52 M33 guide!

Files Needed:
Pre-Compiled 3.40 OE-A Update for Custom Firmwares
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]

Pre-compiled 3.40 0E-A Update for Upgrading from 1.5
[Only registered and activated users can see links. ]

You can upgrade straight to 3.40 OE-A from any homebrew enabled firmware.

Make Sure you download the correct pack for your homebrew enabled psp. Make sure your battery is at 75% or
above

Instructions:

(1) Download the Pre-compiled 3.40 OE-A Update for your firmware version. (2) Make a Folder in My Documents Called 3.40 OE-A (3) Extract "3.40 OE-A Pre Compiled Installer Uploaded by Damo.zip" To the folder you just made (4) Plug in your "PSP" (5) Open up the Folder you made called 3.40 OE-A and double click on "3.40 OE-A Pre-Compiled.exe" (6) Choose to extract to the root of the memory stick on your psp. (7) Disconnect the "PSP" and go to the "Game" folder. (8) Run 3.40 OE-A Firmware Install (9) Once you have opened the program some text will come up. Press the "X" button (10) When it is done flashing the files. Maually reboot the psp by holding the power switch up until it turns off. Then turning it back on. (11) If all went well you should be on 3.40 0E-A

Damo

[chevy03racing]

nice guide man for da noobs really simple.i already had this installed 2 hours ago.i had to do it the hard way generate the data.dsxar and stuff.

[Damo]

Originally Posted by chevy03racing

nice guide man for da noobs really simple.i already had this installed 2 hours ago.i had to do it the hard way generate the data.dsxar and stuff.

Thanks, Thought it would be good to have a guide.

Damo

[armando211]

Thanks for the easy guide I am going to upgrade right now

[nitroglysius]

What are the chances of someone making a 3.03 full update, rather than these small updates which just modify some of the older files?

[Damo]

Originally Posted by nitroglysius

What are the chances of someone making a 3.03 full update, rather than these small updates which just modify some of the older files?

What do you mean. This is a full update. it works on 1.5, 2.71 SE-X, and 3.02 0E-X

Popstation GUI Being added.

Damo

[xeroslash]

hey! thanks for the guide and the installer.

[Damo]

Originally Posted by xeroslash

hey! thanks for the guide and the installer.

No Prob. Thanks for the reply.

Damo

[FifteenthPeak]

I really appreciate what you're doing for the PSP community. =)

(I didn't use it though )

[Damo]

Originally Posted by FifteenthPeak

I really appreciate what you're doing for the PSP community. =)

(I didn't use it though )

Thanks for the thanks anyway.

Damo