Popstation - Compatibility List

[kong009]

resident evil 2 and 3 works

[alienkid]

PSX Dynasty Warriors works but plays slow.

BTW....is there any way to get sony pop files lower than 3.00?

I'm thinking that if I can install sony pop files lower than 3.00 it should resolve the issue with it playing slow.

Am I incorrect or is there not any sony pop files lower than 3.00.

~alienkid

[Gandalf]

Depends on what firmware and popsloader you are running currently.

[alienkid]

Originally Posted by Gandalf

Depends on what firmware and popsloader you are running currently.

Thanks for the prompt reply Gandalf!

I currently have 5.00m33-6. and the Popsloader for such.

While online. I came across PSAR Dumper for 5.00. A couple of questions relating to this:

1. I found a couple of postings online stating that I may need a PSAR Dumper Mod for OFW 2.00 through 2.80? Is this true?

2. Can I proceed with dumping the OFW's 2.50 and 2.80 so I can then use them in POPSLoader?

My goal is to get Dynasty Warriors working smoothly without a slow response on a POP lower than 3.00

[Gandalf]

I do not have a clue but the game should be fine on 5.00m33-6 with the pops no lower than 3.71. Try saving everything from the mem stick and re-format with the PSP then copy everything back. You might have a fake mem stick, if so then there is nothing you can do to help. Try cranking up the CPU speed in the VSH Menu to 333 on both settings.

[alienkid]

Originally Posted by Gandalf

I do not have a clue but the game should be fine on 5.00m33-6 with the pops no lower than 3.71. Try saving everything from the mem stick and re-format with the PSP then copy everything back. You might have a fake mem stick, if so then there is nothing you can do to help. Try cranking up the CPU speed in the VSH Menu to 333 on both settings.

"You might have a fake mem stick..." Not, it is an OFFICIAL Sony 16gb.

"Try cranking up the CPU speed in the VSH Menu to 333 on both settings..." It's been overclocked since I put the cfw on it.

I'll try dumping the OFW's 2.50 and 2.80 and see if that resolves the issue and post the outcome in a bit.

Thanks again Gandalf!

~alienkid